24 Hour Service

28600 Lorna Avenue, Warren, MI

Central Air Compressor

Serving the industry since 1959


Nano

Nano Dryers & Filters

Nano Air Dryers & Industrial Filters

Air Dryers

Air Dryers — Warren, MI — Central Air Compressor

Industrial Filters

Nano Air Dryers

R1 cycling refrigeration air dryers

The advanced nano R1 cycling refrigeration air dryer combines the advantages of a direct thermal exchange with thermal storage. It’s two dryers in one. By combining these two powerful energy saving technologies the R1 provides you with the lowest power consumption available in the market today. This cutting edge, patented concept not only reduces your energy bill, it also offers steady dew point performance and reliable operation to ensure you have continuous, worry free, clean and dry compressed air.

With digital controls that automatically manage energy consumption, a unique zero air loss condensate drain that automatically adjusts with demand - the R1 cycling refrigeration dryer saves energy and eliminates seasonal adjustments. It is the ultimate solution to remove moisture from your compressed air system.

Flow Capacity

  • 500-4000scfm

 

Reliability is built in... and backed by our 2 year warranty

Some of the many features and benefits:

  • Energy saving design - uses up to 80% less energy than a traditional dryer.
  • High ambient dewpoint setting - for additional energy savings in hot ambients.
  • Intelligent condensate drain - self calibrating energy saving drain comes standard.
  • User freindly digital controls - electronic controls & LED interface on every model.
  • Quick & easy start-up - no pre-start up cooling, programming or calibration required.
  • Automatic operation - automatically turns itself off and on as needed.
  • Built for extreme operating conditions - keeps going through summer and winter.
  • No seasonal adjustments - controls and drains self adjust with the seasons.

R2 high temperature cycling dryers

The nano R2 range of refrigerated thermal mass cycling dryers are specifically designed for the unique demands of high temperature compressed air applications. With seven models from 15 to 100 cfm and a 1 micron coalescing inlet filter provided as standard, the nano R2 dryers are the optimum choice for fluctuating air flows and harsh environments.

Perfect for small, non-aftercooled piston compressors or any application with a fluctuating air demand, the R2 Therma-Cycle dryer provides unparalleled reliability, performance and energy savings.

For the optimum in clean compressed air, the R2 dryers can also be supplied with a 0.01 micron after filter, providing comprehensive moisture and particulate removal in a single, cost effective and reliable package.

D1 & D2 modular desiccant dryers

Clean and dry compressed air is easily achieved with the nano ultra-high purity compressed air dryers.

  • more for your money - everything needed for installation is in the box
  • moisture & particulate protection of your production process
  • lower life cycle costs - low energy costs and simplified maintenance
  • built in dew point monitoring (optional)
  • space saving - models up to 177 scfm can be easily wall mounted
  • safe and quiet operation
  • flows 3 - 177 scfm at 100 psig operating pressure
  • peace of mind - the most reliable product of its kind

D3 modular desiccant dryers

Clean and dry compressed air is easily achieved with the nano D3 ultra-high purity compressed air dryers.

  • more for your money - everything needed for installation is included
  • moisture & particulate protection of your production process
  • lower life cycle costs - low energy costs and simplified maintenance
  • built in dew point monitoring (optional)
  • safe and quiet operation
  • flows 212 - 1110 scfm at 100 psig operating pressure
  • peace of mind - the most reliable product of its kind

D4 welded high pressure dryers

The nano D-Series 4 high pressure twin tower desiccant air dryers are designed to remove water vapor from your high pressure compressed air system, lowering the pressure dewpoint to -40 degrees F. No liquid water or ice crystals will form even if the temperature of the compressed air falls to 40 degrees below zero! Designed for the most demanding high pressure applications, the nano D4 twin tower desiccant air dryers are your solution for continuous, uninterrupted clean dry air.

Combining reliable field proven components and a cost effective design with 21st century controls and a digital user interface, there is no better, more dependable, easier to use twin tower dryer available on the market today.

Flow Capacity

  • 42-442 @ 1450psig
  • 68-824 @ 3625psig
  • 88-818 @ 5075psig

D5 heatless twin tower dryers

The nano D-Series 5 heatless twin tower desiccant air dryers are designed to remove water vapor from your compressed air, lowering the pressure dewpoint to -40 or even -100 degrees F. No liquid water or ice crystals will form even if the temperature of the compressed air falls to 40 degrees below zero! Designed for the most demanding applications, the nano D-Series 5 heatless twin tower desiccant air dryers are your solution for continuous and uninterrupted clean dry air.

Flow Capacity

  • 200-3000scfm

 

The advanced design combines reliable field proven components and cost effective operation with 21st century PLC controls and a digital user interface. For clean dry air, there is no better, more dependable, easier to use twin tower dryer available on the market today.

Reliability is built in… and backed by our 5 year warranty on inlet and purge exhaust valves.

D5 externally heated twin tower dryers

The nano D-Series 5 externally heated twin tower desiccant air dryers are designed to remove water vapor from your compressed air lowering the pressure dewpoint to -40 degrees F. No liquid water or ice crystals will form even if the temperature of the compressed air falls to 40 degrees below zero! Designed for the most demanding applications, the nano D5 twin tower desiccant air dryers are your solution for continuous and uninterrupted clean dry air.

Flow Capacity

  • 200-3500scfm

 

The D-Series 5 externally heat reactivated dryers use heat to reduce the use of costly purge air. For consistent performance and cost effective operation these dryers are your optimum choice.

Reliability is built in… and backed by our 5 year warranty on inlet and purge exhaust valves and 10 year heater warranty.

D5 blower purge twin tower dryers

The nano D-Series 5 blower purge twin tower desiccant air dryers are designed to remove water vapor from your compressed air lowering the pressure dewpoint to -40 degrees F. No liquid water or ice crystals will form even if the temperature of the compressed air falls to 40 degrees below zero! Designed for the most demanding applications, the nano D5 twin tower desiccant air dryers are your solution for continuous and uninterrupted clean dry air.

Flow Capacity

  • 500-4000scfm

 

The D-Series 5 blower purge dryers regenerate using a combination of heat and ambient air to minimize - or even eliminate - purge air usage. For consistent performance and cost effective operation these dryers are your optimum choice.

Reliability is built in…and backed by our 5 year warranty on inlet and purge exhaust valves and 10 year heater warranty.

Nano Filters

F1 performance validated filters

Clean and oil-free compressed air is easily achieved with the new range of F1 performance validated compressed air and gas filters.

Nano F1 filters provide:

  • improved filtration for your compressor room or point of use application
  • reliable and efficient liquid and particulate removal
  • space saving design - no tie rod allows easy bowl removal
  • five (5) element grades ranging from 25 to 0.01 micron
  • nineteen (19) models ranging from 8 to 1500 scfm at 100 psig
  • a comprehensive range of accessories

 

1 year element and a 10 year housing warranty!

F1 centrifugal water separators

The nano F-Series1 range of water separators eliminate 99% of liquids in your compressed air or gas system improving your processes and reducing costly downtime.

An internal shield ensures that the separated liquids cannot re-enter the air or gas stream greatly improving drainage and further improving separation performance.

F1 medical sterile filters

The nano F-Series1 range of medical sterile filters are manufactured from cast aluminum alloy providing enhanced strength and feature an E-Coat™ finish for optimum corrosion protection.

This unique design includes elements with stainless steel end caps for compatibility with autoclave sterilization. Each element is 100% integrity tested and provided with an Air Sterilization Certificate to guarantee the highest downstream air quality.

F1 medical vacuum filters

The nano F-Series1 range of medical vacuum filters are manufactured from cast aluminum alloy providing enhanced strength and feature an E-Coat™ finish for optimum corrosion protection.

Elements are constructed with an oleophobic borosilicate microfiber media with an open cell reticulated foam pre-filter. This unique design provides maximum filtration performance while minimizing pressure drop for optimum energy efficiency.

F1 vacuum pump protection filters

The nano F-Series1 range of vacuum pump protection filters are manufactured from cast aluminum alloy providing enhanced strength and feature an E-Coat™ finish for optimum corrosion protection.

Elements are constructed with an oleophobic borosilicate microfiber media with a custom engineered anti re-entrainment layer. This unique design provides exceptional dirt holding and drainage capabilities while minimizing pressure drop for optimum energy efficiency.

F2 high capacity flanged filters

The nano F-Series2 filters provide:

  • Reliable & efficient liquid & particulate removal with low pressure drop
  • 1.0 & .01 micron particulate and coalescing filters for dust, oil & aerosol removal
  • AC activated carbon adsorption filter for vapor removal performance to .003 ppm
  • Nine models in two flow configurations from 1,410 to 10,230 scfm at 100 psig
  • ANSI flanged connections ranging from 3” to 10” diameter
  • Built in accordance with ASME VIII with a U-Stamp and CRN number*
  • Specialized elements for high temperature applications

F3 high temperature dust filters

The nano F-Series3 range of high temperature dust filters are rated for temperatures up to 450 degrees F.

These filters incorporate an innovative push-fit element design with dual o-ring seals to ensure optimum sealing and mechanical strength.

Manufactured in an ISO 9001 approved facility and tested in accordance with ISO 12500.

Inlet/Outlet

  • 1/4"NPT - 3"NPT

Flow Rate

  • 15-6000scfm

F3 mid pressure aluminum filters

The nano F-Series3 range of mid pressure filters consists of nine models in three different housing designs.

Choose from five different elements including 25, 5, 1 and 0.01 micron coalescing and/or dust filtration, and activated carbon oil vapor removal. The custom engineered filter media is designed to provide low air velocity preventing oil carry over for high efficiency filtration with minimal pressure drop.

Manufactured in an ISO 9001 approved facility and tested in accordance with ISO 8573-1:2010.

Inlet/Outlet

  • 1/4"NPT - 2"NPT

Flow Rate

  • 94-1885scfm

F4 high pressure stainless steel filters

The nano F-Series4 range of stainless steel high pressure filters consists of 21 models across three pressure ranges offering flow ratings up to 2000 scfm and pressure ratings up to 5000 psig.

Manufactured from high grade 316 stainless steel and corrosive resistant coated carbon steel, the nano F-Series4 are precision engineered with high pressure applications in mind.

Choose from six different levels of contaminant removal including water separation, 25, 5, 1 and 0.01 micron coalescing and/or dust filtration, and activated carbon oil vapor removal.

F5 filter heater combinations

The nano F-Series5 range of heaters and filter heater packages are specially designed for both industrial and breathing air applications providing efficient filtration and precise temperature control between 68 and 248 degrees F.

Using both an open wound heating coil and high accuracy output temperature sensor the F-Series5 reacts quickly to changes in pressure and flow ensuring a consistent temperature across a wide range of operating conditions.

Inlet/Outlet

  • 3/8"NPT - 1/2"NPT

Flow Rate

  • 27scfm
Share by:
Alternatively, AMP Tagging