M Series 10HP

• Three-phase open drip motor options include 200/208/230/460 volts.
• Full voltage magnetic starter with 115-volt control power
• Instrumentation includes a line pressure gauge, oil temperature gauge, and hour meter.
• Automatic dual control
• Spin-on type oil filter and separator elements provide ease of maintenance.
• Tank mount, elevated platform, and acoustical enclosure options are available.
• Separator trap: Captures and automatically drains condensed water, oil, and dirt.

SPM Series 5 & 7.5 HP

• Modular oil flooded rotary screw industrial air compressor
• Continuous Duty
• 230/460 volt 3-phase Total Enclosed Fan Cooled (TEFC) Premium Efficient Motor
• Full Voltage magnetic starter with 115-volt control power
• T1 Microprocessor Controller
• Air Cooled Oil Cooler with Air Cooled Aftercooler
• Factory fill of Palasyn 45 synthetic oil.
• Spin on type oil filter and separator element for ease of maintenance.
  

LSC Series

• COMPRESSOR – Continuous duty oil flooded rotary screw industrial air compressor
• PILLOW BLOCK – Solidly mounted and aligned to compressor shaft allowing drive shaft direct connection and minimizing power loss.
• FRAME – Rugged steel construction.
• COUPLING & DRIVE – Compressor is flange mounted to frame for positive alignment and directly driven by minimal maintenance coupling.
• AIR INTAKE FILTER – Heavy duty dry type with replaceable element
• SEPARATOR TANK – ASME coded 200 PSIG sump tank, minimum pressure check valve, relief valve, high-efficiency replaceable oil separator element, fluid level sight indicator, and vented fill cap.
• COOLING SYSTEM – Air cooled with air-cooled oil cooler and after–cooler. Compressor temperature maintained by auto adjusting thermos valve.
• CONTROLS – Full modulation pneumatic control for smooth control. Pilot unloader valve for minimizing power with no air demand.
• INSTRUMENTATION – Air pressure and discharge temperature gauges
• PROTECTIVE DEVICES – High temperature shut down switch for interfacing to driver’s safety circuit. Overpressure relief valve
• LUBRICATION – Factory filled with Palasyn 45. Equipped with microfiber full flow, spin on oil filter.
  

D Series 15-40HP

• Microprocessor controller with sequencer, lead-lag, and remote monitoring for up to eight machines
• Motor with Totally Enclosed Fan-Cooled (TEFC) enclosure type for indoor and outdoor use
• The motor starter has a water-tight, dust-tight, sleet resistant NEMA 4 enclosures for indoor and outdoor use.
• The air end, manufactured by Sullivan-Palatek, has advanced rotor design features; oversize radial thrust bearings, and precision working rotary screws that provide no wear.
• Protective devices include class 20 solid-state overload relay, elevated temperature and overpressure shutdown switches, and anti-restart pressure switch preventing starting while air compressor is pressurized.
• Coupling and drive: the compressor is flange mounted to motor C-face for positive alignment and directly coupled for increased efficiency.
• Cooling system equipped with double pass air-cooled aftercooler with thermostatic control for maintaining the appropriate oil operating temperature within 15 degrees of ambient.
• Using oversized coolers allows for greater cooling performance at elevated temperatures.
• Oversized dry type air intake filter with easily replaceable elements
• One-piece lube fill elbow and level sight glass, a vented cap for pressure release when removing.
• Inlet/check valve features a one-piece housing for dependable performance and complete modulation.
  

DG Series 25-40HP 

• Microprocessor controller with sequencer, lead-lag, and remote monitoring for up to eight machines
• Motor with Totally Enclosed Fan-Cooled (TEFC) enclosure type for indoor and outdoor use
• Slow turning, low RPM motors = quieter compressor and longer-lasting due to motor speed
• The motor starter has a water-tight, dust-tight, sleet resistant NEMA 4 enclosures for indoor and outdoor use.
• The air end, manufactured by Sullivan-Palatek, has advanced rotor design features; oversize radial thrust bearings, and precision working rotary screws that provide no wear.
• Protective devices include class 20 solid-state overload relay, elevated temperature, and overpressure shutdown switches, and anti-restart pressure switch preventing starting while air compressor is pressurized.
• Couplings and drive: the compressor is flange mounted to motor C-face for positive alignment and directly coupled for increased efficiency.
• Cooling system equipped with double pass air-cooled aftercooler with thermostatic control for maintaining the appropriate oil operating temperature to within 15 degrees of ambient.
• Oversized dry type air intake filter with easily replaceable elements
• One-piece lube fill elbow and level sight glass, vented cap for pressure release when removing.
• Inlet/check valve features a one-piece housing for dependable performance and complete modulation.
  

UD Series 40-50HP

• The up-draft cooler design vents air away from the package. This is a possible space-saving feature that allows heat recovery that could be used for various purposes: supplement space heating, heating of liquids, drying processes, etc.
• Motor with Totally Enclosed Fan-Cooled (TEFC) enclosure type for indoor and outdoor use
• The motor starter has a water-tight, dust-tight, sleet resistant NEMA 4 enclosures for indoor and outdoor use.
• The standard T1 microprocessor controller displays status, warnings, maintenance, and is capable of sequencing multiple compressors (gauges are optional)
• One-piece inlet/check valve housing for dependable performance and complete modulation
• Heavy-duty dry type air intake filter with easily replaceable elements
  

SP11 Series 25-40 HP

• The up-draft cooler design vents air away from the package. This is a possible space-saving feature that allows heat recovery that could be used for various purposes: supplement space heating, heating of liquids, drying processes, etc.
• Motor with Totally Enclosed Fan-Cooled (TEFC) enclosure type for indoor and outdoor use
• The motor starter has a water-tight, dust-tight, sleet resistant NEMA 4 enclosures for indoor and outdoor use.
• The standard T1 microprocessor controller displays status, warnings, maintenance, and is capable of sequencing multiple compressors (gauges are optional)
• One-piece inlet/check valve housing for dependable performance and complete modulation
• Heavy-duty dry type air intake filter with easily replaceable elements
  

SP13 Series 40-60HP

• NEMA Premium Efficient, Severe Duty TEFC motor
• The motor control assembly has a NEMA 4 enclosure for safe use in industrial environments.
• Equipped with an enhanced user display, the Q1 controller is capable of web access and remote monitoring with the sequencing of up to twelve compressors.
• The new SP13-Series airend is designed for efficiency, performance, and minimal maintenance.
• The new high-flow, low-loss inlet valve is designed for increased efficiency and dependable performance.
• The compressor assembly is flange mounted to the motor’s C-face for positive alignment.
• Optimized Air-Oil separators have less restriction and reduce fluid carryover to less than 1 ppm with an 8,000-hour maintenance frequency.
• Filled with PAL-EXTRA 44, a fully synthetic premium lubricant formulated to prevent varnish under higher temperatures and harsh conditions with an 8,000-hour extended drain interval.
• Condensate separator with timed auto-drain collects and automatically drains condensate.
• Optimized electro-pneumatic controls reduce energy consumption in an unloaded state.
• Auto-Dual control
• Cooler clean-outs for ease of cleaning
• Raised face 4-bolt flange at the compressor’s outlet to prevent stresses on plumbing and to aid in the installation.
• Heavy-Duty single pass Air/Oil coolers reduce system losses for improved efficiency and performance up to 104°F.
  

SP 16 Series 75-125HP

• Motor with Totally Enclosed Fan-Cooled (TEFC) enclosure type for indoor and outdoor use
• Slow turning, low RPM motors = quieter compressor and longer-lasting due to motor speed
• The motor starter has a water-tight, dust-tight, sleet resistant NEMA 4 enclosures for indoor and outdoor use.
• Equipped with an enhanced display Q1 microprocessor, the controller is capable of web access monitoring and sequencing up to twelve compressors.
• SP16-Series air end manufactured by Sullivan-Palatek
• One-piece inlet poppet valve housing designed for dependable performance.
• The compressor is flange mounted to motor C-face for positive alignment.
  

SP 20 Series 125-300 HP

• Motor with Totally Enclosed Fan-Cooled (TEFC) enclosure type for indoor and outdoor use
• Slow turning, low RPM motors = quieter compressor and longer-lasting due to motor speed
• 460-volt MFV with 115-volt control
• This unit includes a one-piece inlet poppet valve housing for reliable performance.
• Manufactured with a display Q1 microprocessor, the controller is capable of web access monitoring and sequencing up to twelve compressors.
• The compressor is flange mounted to motor C-face for positive alignment.
• The air intake filter includes an oversized dry type with easily replaceable elements.
  

SP32 Series 300-450HP

• Motor with Totally Enclosed Fan-Cooled (TEFC) enclosure type
• Slow turning, low RPM motors = quieter compressor and longer-lasting due to motor speed
• Air end manufactured by Sullivan-Palatek
• 460-volt, solid state with 115-volt control motor starter
• Equipped with a Q1 microprocessor, the controller can manage web access monitoring and sequencing of up to 12 compressors.
• The air intake filter includes an oversized dry type with easily replaceable elements.
• The compressor is flange mounted to motor C-face for positive alignment.
  

VFD Series 15-450HP

• Wide power range for 208V, 230V, and 460V

• Pressure transducer motor speed control.

• Factory Settings:

• Programmable digital outputs
• Digital inputs
• Programmable outputs: four relays, four transistors
• Eight programmable parameter sets with S-curves, power off function, PID process controller, electronic motor protection, internal timer. Output frequencies up to 160 Hz with output voltage stabilization; switching frequencies up to 16kHz; output phase monitoring.
• DC bus circuit connection, moto thermal sensor connection, hardware current line
• The VFD helps reduce energy. Operating at 70% capacity, the VFD consumes 10% less power than a standard compressor operating with on-off control and 20% less than a compressor with modulating control.
• The VFD has a soft start feature that maintains a low starting current. It reduces stress on the site power supply and reduces motor wear.
• The VFD system complies with the Electro-Magnetic Compatibility standard and is UL/CSA listed.
• The VFD system is not limited to a fixed number of starts per hour.
• VFD 50HP and up have dedicated fan and motor drives to improve cooling and improve compressor efficiencies.
  

ECC Series 50-450 HP

• 460/575/3/60, 400/3/50-volt energy efficient C-Face electric motor
• Automatic stop/start or constant speed controls.
• Built-in Aftercoolers
• Cam-Loc Cable Connectors
• Easily removable acoustical enclosure panels that allow for ease of maintenance
• Heavy duty two-stage air intake filter
• Centrally found lifting bail on 50-250hp, four-point lift for 300-450hp
• Lube Filter
• Motor Starter
• Skid Mounting
• Variety of gauge instrumentation controls
  

D110PKUW

• Hinged canopy with gas springs for service access
• Torsion bar suspension for stable towing and lightweight for towing with smaller vehicles
• Fully adjustable height draws bar.
• Full shift fuel tank
• Lifting eye, center mounted for machine pick-up.
• Service valve on control end.
• Automatic shutdowns
• Stop, turn, taillights.
• Automatic 0 to 100% compressor control
• Automatic blowdown valve
• Easily runs 90 lb. breaker.
• Dual slide-lock canopy latches (padlockable)
• Remote fluid drains
  

D185PKR 185 CFM

• Lightweight composite clamshell canopy design offers both strength and improves access to all routine serviceable components.
• A smaller footprint and foldable drawbar make shipping and storing a great advantage.
• A wider wheelbase provides improved balance and stability on the highway and job site.
• Air end manufactured by Sullivan-Palatek includes a three-year warranty.
• Composite full shift 30-gallon fuel tank with fuel level visibility
• Sullivan-Palatek Electronic Controller (SPEC)
• LED tail lighting
  

D185PDKR - Dual Pressure Portable Compressor - 185 CFM/100 PSI, 150 CFM/150 PSI

• Lightweight composite clamshell canopy design offers both strength and improves access to all routine serviceable components.
• A smaller footprint and foldable drawbar make shipping and storing a great advantage.
• A wider wheelbase provides improved balance and stability on the highway and job site.
• Air end manufactured by Sullivan-Palatek includes a three-year warranty.
• Composite full shift 30-gallon fuel tank with fuel level visibility
• Sullivan-Palatek Electronic Controller (SPEC)
• LED tail lighting
  

D185PIZP 185 CFM

• Lightweight composite clamshell canopy design offers both strength and improves access to all routine serviceable components.
• A smaller footprint and foldable drawbar make shipping and storing a great advantage.
• A wider wheelbase provides improved balance and stability on the highway and job site.
• Air end manufactured by Sullivan-Palatek includes a three-year warranty.
• Composite full shift 30-gallon fuel tank with fuel level visibility
• Sullivan-Palatek Electronic Controller (SPEC)
• LED tail lighting
  

185PIZ4 185 CFM

• Air end manufactured by Sullivan-Palatek includes a three-year warranty.
• 30-gallon steel fuel tank
• Durable galvanneal sheet metal enclosure with a powder coated finish for rust and corrosion resistance
• Large toolboxes on each side with lockable handles
• Sullivan-Palatek Electronic Controller (SPEC)
  

D210PHKR 210 CFM

• Seventy-four hp Kohler Tier 4 Final engine
• Air end manufactured by Sullivan-Palatek includes a three-year warranty.
• Dual pressure high-low selector valve
• 29-gallon steel fuel tank
• Durable galvanneal sheet metal enclosure with a powder coated finish for rust and corrosion resistance
• Large toolboxes on each side with large service doors with lockable handles
  

D260PDKR 260 CFM

• 74-hp Kohler Diesel Tier 4 Final engine
• Air end manufactured by Sullivan-Palatek includes a three-year warranty.
• Dual pressure high-low selector valve
• 30-gallon steel fuel tank
• Durable galvanneal sheet metal enclosure with a powder coated finish for rust and corrosion resistance
• Large toolboxes on each side with lockable handles
  

D375PHKR 375 CFM

• Large, 130mm Diameter Twin Screw Air End
• Exclusive Three-Year Warranty on Air End, Unlimited Hours
• Automatic 0 to 100% Capacity Control
• Two Stage Dry Type Air Filter with Indicators
• Oil Level Sight Gauge
• Choice of Lunette Eye or Ball Hitch on Height Adjustable Drawbar
• Noise Level Limited to Maximum of seventy-six dBA at 7 Meters
• Galvanneal Enclosure-Rust & Corrosion Resistant
• Automatic Safety Shutdown
• High Compressor Discharge Temperature
• High Engine Temperature
• Low Engine Oil Pressure
• Full Containment Frame
• Remote Drains
• Automatic Blowdown Valve
• LED Stop, Turn, Taillights
• Unloaded Starting
• E-Stop
• Completely contained filtration.
• Separate dual outlets for instru¬ment quality air internal lock out
• 1 – 1 ½” NPT
• 1 – ¾” NPT
  

D750 & D900 Series 750 & 900CFM

• 310 HP CUMMINS QSB6.7 Tier 4 Final – Stage V
• 204mm diameter twin screw air end manufactured by Sullivan-Palatek
• The seven” display Sullivan-Palatek Electronic Controller (SPEC) offers numerous readouts including, but not limited to, compressor temperature and complete engine diagnostics.
• Large service doors allow for simple maintenance access.
• The noise level was limited to seventy-six dBA.
• Large, aluminized fuel tank with a 150-gallon capacity
• The exterior is a durable galvanneal sheet metal enclosure with a powder-coated finish for rust and corrosion resistance.
• Automatic shutdown and protection system
• Three-year unlimited hour air end warranty
  

D1150 High Pressure 1150 CFM @ 350 PSI - 900 CFM @ 500 PSI

• Cummins engine
• Air end manufactured by Sullivan-Palatek has a two-year warranty.
• Large service doors allow for simple maintenance access.
• The noise level was limited to seventy-six dBA.
• Large steel fuel tank with a 224-gallon capacity
• Equipped with dual axle running gear and electric brakes.
• Durable galvanneal sheet metal enclosure with a powder coated finish for rust and corrosion resistance
• Solar Battery Charger
  

D1600 SERIES 1600 CFM

• Cummins engine
• Air end manufactured by Sullivan-Palatek has a three-year warranty.
• Large service doors allow for simple maintenance access.
• The noise level was limited to seventy-six dBA.
• Large steel fuel tank with a 224-gallon capacity
• Equipped with a dual axle running gear and electric brakes.
• Durable galvanneal sheet metal enclosure with a powder coated finish for rust and corrosion resistance
• Solar Battery Charger